I like to buy the best products out there, which normally means I buy the more expensive items. But come on, this is a piece of plastic to protect my iPhone 4 screen. I have only bought a screen protector once before, for my toddler's iTouch, and had bubbles all over the screen. So I thought these screen protectors were all garbage. But after getting a big scare by accidentally putting my iphone in my pocket with my car keys, and getting a very light scratch on my screen, I thought I'd give these screen protectors another try.

And again, I thought I'd try some of the cheapest at Amazon, because, well, it's just a piece of plastic. If I was wrong, I was only out a buck or so, and could then go and buy the expensive screen protectors. But this time, I researched around and read some blogs, and found out dust is the culprit for bubbles. Taking that advice, I followed the directions and was able to put the screen protectors on 2 iPhones bubble-free! Here's what I did:

1. I chose my desk as the place to do the application. I wiped it down with an all-purpose cleaner, then wiped it down with a damp wash-cloth. I also did this during the day, with bright sunlight coming into the room. Do not try this at night, I don't think it shows all the dust hitting the screen.
2. Turn off your iPhone. You want to make sure the screen stays black, it's much easier seeing dust.
3. I then used another damp wash-cloth (if you squeeze it and water comes out, it's too wet. It needs to be barely damp), and wiped down my iPhone, front and back.
4. Then I got the little piece of cloth that shipped with the screen protectors and wiped the screen down until it was as clean as I could get it.
5. The iPhone was laid down on the damp cloth so it wouldn't rock and slide as i was applying the screen protector.
6. Peel off "Side 1", and start by lining up the camera hole and the ear hole. Then slowly lay down the rest of the protector on the screen, making sure no bubbles form as you go. You will get some, but if you do it right, they will only be near the edges.
7. Once it's laid down, then take a fingernail and apply gentle pressure from the center of the screen towards the edge. Basically driving the bubble out from underneath the screen protector.
8. The last step, peel off "Side 2".
9. Done!

Should only take about 5-10 mins. But it's so worth it. I bought the matte version of these and it's a nice improvement.

So my initial assessment that screen protectors are garbage is wrong, my technique at applying the screen protectors was garbage. A little bit of homework on the Internet, dust control, and I got a quality result. I highly recommend these screen protectors from this seller. I'd buy them again!

Buy Now Here

» Read More...

» Read More...

» Read More...

I mean usually purchase a more expensive item, you want to buy a best product there. But this is a piece of plastic to protect the screen of my iPhone 4 coming. I only bought a iTouch and my toddler ago for screen protectors 1 degree and had a full-sized bubbles. So all these screen protectors considered trash. However, after you have big fear by accidentally put my iphone to my car keys in my pocket and get a very light scratches on my screen, another of thought would give try these screen protectors.

And again, I'm cheap because it's only plastic part well, I'll try some of Amazon,. Buck if I was wrong, or it was just out and then go and buy an expensive screen protector. However, research around this time, and found dust and some blog reads of perpetrators of the foam. Taking that advice, and I followed the instructions and bubble 2 iPhones free was able to put a screen protector! I've done here:

1. I have chosen my desk as the place for application. And wiped it down with all purpose cleaner and damp wash cloth and wiped it down. It was bright sunshine, I come into the room during this day. I don't think dust do not try this at night, pressing the screen appears.
2. Turn off your iPhone. Make sure the screen stays black, it looked easy, there is too much dust.
3. I am using another damp cleaning cloth (if water comes out and squeeze it, is too wet. Moisture may have finally it), and wipe my iPhone, front, and back then.
4. Then got a small piece of cloth until shipped with screen protector and clean as you can get it wiped from the screen.
5 Put a damp rag and applied wouldn't lock, slide screen protector iPhone.
6. "Side 1", start by lining the camera hole and the hole in the ear and peel off. Place the rest protector formation not sure bubbles slowly as you go and then, on the screen. Get some, right if you do it, they just will be near the edges.
7. Laid down once and take a finger nail, apply gentle pressure from the center of the screen towards the edges. Basically, driving from the bubble under the screen protector.
8. The last step is "side 2" from it is peeling.
9. Done!

Just about to take 5-10 minutes. However, it is worthwhile. Bought these mats version, it is a great improvement.

My rubbish screen protector is an early evaluation is wrong, so my technique was rubbish by applying the screen protector. Internet homework, dust control, a little bit, got quality results. Screen Protector's recommendation from this seller. I would buy them again!

Buy Now Here

» Read More...